Skip to main content

Overview

An extension is an assignment to a physical phone, softphone, voicemail box, or any similar device configured within the system.  A phone must have an extension assigned to it to receive calls.

A user cannot configure his or her extension. Only an administrator can update an extension.

Configuration Options

Field
Type
Description
Required
Extension Alphanumeric

Extension identifier

 

Numeric digits are recommended if the extension must be dialed from a phone.

Yes
Device Type List

Extension device type

 

Type
Description
SIP

SIP (Session Initiation Protocol) device

IAX2 IAX2 (Inter-Asterisk eXchange) device
DAHDI

DAHDI (Digium Asterisk Hardware Device Interface) device

VIRTUAL

Voicemail-only or call-forwarding extension, not connected to any physical device or softphone

SIP-VIRTUAL

Additional extension on a device that supports multiple extensions

VIRTUAL and SIP-VIRTUAL device types do not use extension licenses

Yes
CallerID Name Field

Caller ID name – displayed on devices that support caller ID 

Yes
User List

The portal user associated with the extension (refer to Users for more information) – select if a specific user requires permission to access

 

VIRTUAL and SIP-VIRTUAL device types do not use extension licenses.

Yes
Agent Value

Indicates if the extension is associated with an agent 

Read-only
Status
Value

Status of the device registered to the server

 

Status
Description
OK

The device is registered and configured

 

IP and port are always displayed for this status.

UNREACHABLE

The system cannot reach a registered device

 

An UNREACHABLE status could indicate an issue.  Contact your system administrator if you suspect a problem.

UNKNOWN

The system has given up trying to contact an UNREACHABLE device

UNMONITORED

Endpoint is not monitored

 

IP and port are always displayed for this status.

An UNMONITORED endpoint can still be called.  When this endpoint is called, the system will try to reach it until it times out.  If the endpoint is unresponsive, the call fails.

BLANK

No device is registered to this extension

 

A blank status could indicate an issue.  Contact your system administrator if you suspect a problem.

Read-only
IP Numeric

Internet protocol address (IPv4 format – e.g. 255.255.255.255) assigned to the extension

Read-only
Port Numeric

Device signaling port

Read-only
Voicemail Checkbox Enables or disables voicemail No
Voicemail Pin Numeric

Voicemail PIN – enabled if voicemail is enabled

Yes if voicemail is enabled
Voicemail Email Email

Email address where voicemail messages are sent – enabled if voicemail is enabled 

No
Controls
n/a

Extension tools

 

Icon
Description

image.png

Opens the Voicemail configuration manager

image.png

Opens the Phone Buttons configuration manager

image.png

Delete extension – see Deleting an Extension below
n/a

Additional Configuration

Some extensions require additional configuration, depending on your organizational needs.  These configuration options are described under Phone Configuration. Contact your system administrator for more information.

Adding an Extension

  1. Click Extensions on the Navigation pane.
    The Extension Settings pane appears.
  2. Click New Extension on the upper menu.

    image.png

    A row editor appears.
  3. Enter the fields as required.  Refer to Configurations above.
  4. Click Save New Extension.
    The new extension has been added.

Editing an Extension

  1. Click Extensions on the Navigation pane.
    The Extension Settings pane appears.
  2. Double-click the extension row you want to edit.
    A row editor appears.
  3. Make any desired edits.  Refer to Configurations above.
  4. Click Save.
    The extension edits are complete.

Deleting an Extension

Warning: Even if an extension is inactive or disconnected, it may have call forwarding enabled, or the associated voicemail box may be used elsewhere. Ensure all functions related to the extension are unused before removing it.

  1. Click Extensions on the Navigation pane.
    The Extension Settings pane appears.
  2. Under the Controls column, click the red X for the extension you want to delete.
    A confirmation pop-up window appears.
  3. Click OK to delete the extension.

Additional Notes

  • The number of available extensions depends on your IntellaSoft licensing. You may need to purchase additional licenses to add more extensions. Contact your IntellaSoft sales representative for more information.